Happy dealing with Baader.Had an issue with the microfocuser and sent email to explain my problem.I was dealing with Michael in customer care and he was a fantastic help with my issue and sorted it out for me.Will be back,happy using the service.
Wie immer Blitz schnelle Lieferung , auch wenn bei der ersten Lieferung es defekte B Ware war wurde aber anstandslos und genauso schnell getauscht.
Laut Hersteller erst ab 2006 aufwärts kompatibel, soweit richtig aber mit etwas Handwerklichen Geschick ohne viel Aufwand passt der Motor auch an den Baujahren darunter.
Mein C8 sollte aus dem Jahr 1993 sein zum Glück mit wenig Spiegelshifting.
Von der Sache müssen nur die drei Löcher auf der Befestigungsplatte aufgebohrt werden und mit einen kleinen Fräser etwas nach gefräst damit der Kopf plan rein passt .
10min Arbeit
Bis heute hat sich mir nicht erschlossen wozu die drei Schrauben +/- und Pfeil steht auch nicht in der Beschreibung
Being mainly involved in deep sky imaging with automatic focus control, I somewhat lost the feeling for visual observing objects of our solar system. Therefore, I purchased a highly portable Alt/Az mount for my visual gear. All refractors are equipped with Feather Touch focusers and make use of Optec’s FocusBoss II, which can drive all my focus motors.
Despite of the fact that focusing by hand is easy with the above-mentioned focusers, a relaxed sitting position during planet observation - imho essential for satisfying observation results - and focusing in parallel is sometimes cumbersome.
Consequently, I decided to purchase the FocusLynx Hand Control which is a perfect fit to my FocusBoss hub and is a relief for acrobatic focuser handling during observing.
After ordering the hand control at Baader Planetarium, it arrived already next day. I was expecting a plastic gimmick and was really surprised: The aluminium housing feels extremely premium, the finish is perfect.
I immediately connected the hand control to the hub with different focus motors attached – all motors worked perfectly after setting the correct values in the hub software (the software offers the most common motor types).
With a computer attached to the hub, I computer-synched the motors at different positions, which was immediately reflected in the hand control display (this hold also true for and vice-versa synching).
De-connecting and re-connecting the hand control works without any flaw, parallel use (hub attached to hand control and computer in parallel) is void of any issues.
Focusing can be achieved using the turning knob or the “in” and “out” push buttons – I personally preferred the old-fashioned push buttons (the buttons behave in an accelerating manner when holding them down).
By pressing the turning knob down, focusing speed is toggled between 1x -> 10x -> 100x speed (1x = single step resolution, 10x = ten step movement with each encoder tic, and 100x for high speed and longer travel moves), a nice feature!
The top left button is the “mode” button, used to cycle between the “firmware information screen”, “focuser 1”, “focuser 2” and the “home/sync” focuser screens.
The focuser screen will display the focuser nickname (to be set in the hub software), the current position in steps and temperature (if a temperature probe is attached). Using my Optec QuickSync focus motor with an internal temperature probe confirmed the expected display read-out.
And here comes the major downside of the hand control – obviously the hand control display was designed for nighttime use – during daytime (solar observing), the display is NOT readable. It would be great if Optec could add a dimming function to this hand control, then it would be perfect for me.
The hand control comes with two standard coiled telephone handset cables (long and short) which attach to the RJ22 socket on the bottom of the hand controller – a nice feature for everybody who prefers to tailor-crimp his/her own cables.
In summary, I am very delighted with this hand control and can really recommend its purchase and use.
FEATHERTOUCH MICRO FOCUSER FÜR CELESTRON HD11" / CPC1100 / C11
Ich habe den Feathertouch sehr schnell einbauen können. Die online Beschreibung waren dabei sehr hilfreich. Also: echt einfach.
Das Ergebnis ist ein extrem genaues Justieren der Fokusposition. Ich benutze dazu an einem Stern ein Justage-Maske. Ich kann durch den Feathertouch Micro Focuser für Celestron HD11" / CPC1100 / C11 immer reproduzierbar den Fokus einstellen. Am Messier Objekt M101 (11"EdgeHD, Nikon Z6, ISO4000, 240 s, 10 Bilder) und den Kometen C/2019Y4 (am 22.04.2020, 11"EdgeHD, Nikon Z6, ISO 8000 90s, 1 Bilder) kann man dies schön sehen.
Absolut lohnenswertes Zubehör!
Ich habe den Fokusmotor an meinem 8se auf CGEM DX Montierung angebracht. Die Montage und Kalibrierung verliefen Dank der gut verständlichen Anleitung problemlos. Ich steuere die Montierung und den Fokuser über die CPWI Software aber auch über die direkte PC Steuerung mit dem Fokuser-Programm läßt sich der Motor sehr gut ansteuern. Ein tolles Produkt das ich sehr empfehlen kann.
Feather Touch Micro Focuser für Celestron CPC 1100
Habe meinen Standart Focuser an meinen Teleskop duch den Feather Touch Micro Focuser ersetzt. Kein Vergleich. Fokusieren kann so einfach sein. Hervorragendes Produkt. Sehr gute Verarbeitung. Bin sehr zufrieden damit. Schnelle Lieferung. Sehr gute Verpackung. Keine Beanstandung.
Nice addition and first step towards focus automation
A very nice addition, sturdy and nicely crafted, for my edgeHD 8" SCT astrophotography setup. Very nice build and performs great out-of-the-box. Also with the intention to create a fully automated focuser setup.
Its good to know that with the edgeHD 8" SCT setup, you will need to use the original orange adapter plate as well so you keep the full focus range.
This is the only additional step needed for a edgeHD 8 and not being documented. The installation is indeed as simple as mentioned in the documentation and was done within 15 minutes.
Auf den gängigen online Marktplätzen tauchen vermehrt originalverpackte Celestron Teleskope auf, mit dem Hinweis, ohne Starsense.
Kann ich den Halter mit Aktivierungscode in dem Fall nachkaufen?
Wir bedauern sehr, aber das ist nicht möglich. Leider kommt es vor das Kunden ein kleines Starsense Explorer Teleskop kaufen nur um den Handyhalter abzunehmen und an einem größeren Teleskop zu befestigen und mit den Codes zu betreiben. Oder auch um nur den Code zu entnehmen und das Teleskop weiter zu verkaufen.In diesen Fällen können wir den Käufer dieser Teleskope nicht helfen, die Starsense Explorer Funktionalität wieder herzustellen.
Für weitere Beratung, Service und Kauf von Celestron Produkten in der Schweiz wenden Sie sich bitte an die schweizerischen Celestron Händler oder den schweizerischen Distributor www.engelberger.ch. Celestron Deutschland ist lediglich für Deutschland und Österreich zuständig.
Antwort von: Baader Web Team (Admin) am 19.06.2024 11:55:00
Die Batterien/Akkus werden in Reihe geschaltet, also z.B. 8x1,5 ergeben so die benötigten 12Volt. Entsprechend würden 1,2Volt mal Acht nur noch
9,6Volt ergeben -- teilentladen im Realbetrieb wohl bald unter 9Volt. Das ist schlicht zu wenig und kann auch zu Defekten führen. Daneben gibt es
auch 1,6Volt Akkus, welche man gut nehmen kann. Die Montierungen können ja auch über ein KFZ-Stecker Kabel über das Auto Bordnetz
betrieben werden wo 13,8Volt vorliegen.
Antwort von: Baader Web Team (Admin) am 19.06.2024 10:01:00
Ich habe bei Ihnen am vor kurzem ein älteres Celestron C14 SC OTA (Art.Nr. 820176X, B-Ware #2058) aus dem Schnäppchen-Markt gekauft. Dies verfügt über 2 Mirrorlocks. Meine Frage:
- Sind die Mirrorlocks justiert und eingestellt, so dass nichts verändert werden sollte und wird der Hauptspiegel damit permanent gegen Verkippen gesichert?
Oder:
- Muss man mit den Mirrorlocks nach dem Fokussieren den Hauptspiegel feststellen?
Bei jeder manuellen Fokussierung müssen die Mirrorlocks unbedingt geöffnet sein. Sobald der Hauptspiegel über die Stangen fixiert ist, darf die Fokussierspindel nicht gewaltsam gedreht werden. Eine mechanische Verbiegung der Präzisionsspindel wäre möglich, zumindest wenn man versucht, den Hauptspiegel zurück zu bewegen.
Daher ist wie folgt vorzugehen: Vor der manuellen Fokussierung die Mirrorlocks öffnen und die Fokussierroutine durchführen. Nach erfolgreicher Fokussierung beide Mirrorlocks wieder handfest anziehen.
Diese Möglichkeit, oder auch Fastar-Option genannt, ist bei den Teleskopen schon gegeben. Über einen großen Rändelring wird der Fangspiegel
(Sekundärspiegel) zugänglich und kann so entnommen werden. Dann ist der Weg frei zum anbringen eines HyperStar.
Antwort von: Baader Web Team (Admin) am 11.06.2024 15:34:00